Monster Can Dimensions: Sizes, Height, Width, and Easy Comparisons

Ever have that nagging question about whether a Monster Energy can will fit in the cupholder/drink holder of your car, on a refrigerator shelf, or in the pocket (backpack okay) of your backpack? Knowing the size before you buy or store a tin saves time and aggravation.

Each Monster Energy drink is the same size but not every can has the same height or shape. The well-known US can is 16 fluid ounces, but there are also smaller and larger variants. On its official United States website Monster lists sizes of its Original Green drink as 12 oz, 16 oz, 19.2 oz and 24 oz.

So, let’s go on to monster can sizes explained in simple words and find out the dimensions of a monster cup. You will also realize the differences between sizes and how to determine if a can is going to fit in your place.

Standard Monster Can Size at a Glance

The typical US Monster Energy can has a 16 fl. oz (473 mL) capacity; For common reference, this can sits about 6.2 inches tall x 2.6 inches wide. These numbers are on par with the measurements for a standard 16 oz drink can as listed by packaging supplier Crown.

Here is a quick reference:

Measurement	Standard 16 oz can
Drink capacity	16 fl oz / 473 mL
Height	About 6.2 inches / 15.7 cm
Body diameter	About 2.6 inches / 6.6 cm
Height in millimeters	About 157 mm
Diameter in millimeters	About 66 mm

What does that look like? Any tall, upright drink can on a table, say. It stands taller than a standard 12 oz soda can, but has about the same dimension as its frame. Your specific can you buy might vary slightly, so use these numbers as a general reference – they aren’t a warranty for any Monster product.

Monster Can Sizes and Their Measurements

Different can shapes can be used for different capacities. The table below shows approximate hit sizes that are commonly reported for popular formats. Monster explicitly states the capacities for each of its US Original Green drinks, but does not list a complete official height-and-diameter chart on the product page for every size.

Can size	Capacity in metric	Approx. height	Approx. body diameter
12 oz	355 mL	Around 6.1 in / 15.5 cm	Around 2.3–2.6 in / 5.8–6.6 cm
16 oz	473 mL	Around 6.2 in / 15.7 cm	Around 2.6 in / 6.6 cm
19.2 oz	568 mL	Varies by can design	Check the individual can
24 oz	710 mL	Around 7.5–8 in / 19–20.3 cm	Varies by can design
500 mL international format	16.9 US fl oz	Around 6.6–6.7 in / 16.8–17 cm	Around 2.6 in / 6.6 cm

They are approximate reference values (not specifications at all). And some product lines are sold in different packaging, so there is no way to tell the physical measurements based solely on a can’s capacity. All that said, if you need a snug holder or storage area for the can you actually have, please measure it.

How Tall Is a Regular 16 oz Monster Can?

An ordinary 16 oz Monster can is about 6.2 in, or about 15.7 centimeters tall. Which, in millimeters, is approximately 157 mm.

Visualize this as the height of a can that’s more than 6 inches tall on your desktop. It even towers over a number of short soda cans, which are typically 4.8 inches high.

This increased height offers additional space for more liquid without significantly widening the can. This infrastructure means Monster cans are not the same as hot-video soft drink cans.

For if you are putting one on a shelf, atop the fridge, it is wise to leave a smidge of space above the can. For example, if you have a shelf that measures precisely 6.2 inches, there might not be enough space for you to comfortably lift the can in and out of it.

Small, Standard, and Large Monster Cans

12 oz Monster Can

A 12 oz can has roughly the equivalent of about 355 ml. Depending on the variant, some will use a slimmer body or a different packaging shape altogether. Commonly cited is a height of about 6.1 inches, but how tall the can actually needs to be varies with the design of the can.

This volume is shorter as compared to the usual 16 oz version, however not every 12 oz can is that much shorter. Volume is important, but shape can also matter!

16 oz Monster Can

The 16 oz can which is the US standard format. It has a capacity of almost 473 ml (16 US fl oz), and is approximately 158 mm (6.2 in) tall by 66.4 mm (2.6 in) across the body.

This is really the most useful size to have in your head for everyday comparisons. These measurements do serve to provide a ballpark as to what the average size of a Monster can is if you were ever asked.

19.2 oz Monster Can

Monster sells its Original Green size for 19.2 oz — also in the United States. That is approximately 568 mL.

Don’t assume its height and diameter just by its amount of liquid it holds. These are standard can sizes so it is always best to check the actual product for specific measurements.

24 oz Monster Can

The 24 oz version contains around 710 mL. This has an 12 oz ca, which is bigger than their normal high quality 16 oz ca and several themes are ~7.5–8 inches tall

Also, not every 24 oz Monster can is the same width – designs vary! Before picking a fitted holder, measure the body and also height of.

What Is the Diameter of a Monster Can?

Diameter – This is the distance across the round body of the can, measured through its center. If you want an actual reference point, a regular 16 oz Monster can is roughly 2.6 in (or ~6.6 cm). While Crown displays a diameter of 66 mm for its regular 16 oz beverage can.

This is a very simple way to get a feeling of the measurement:

2.6 inches is a little over 6.5 cm

66 mm is the same as 6.6 cm.

And the diameter refers to across the can, not around its outer edge.

When purchasing a can sleeve or cup holder or storage slot, please check the internal width of the product. Although the height is adequate, its opening may not be wide enough for the can to fit.

Hey, keep in mind that if the mug opens up like this at the top rim it may not be as wide, your main body usually is. If you are making a fitted item, measure at the widest part that needs to go through the opening.

Monster Can Compared With Other Drink Cans

Comparing Monster with a familiar soda can make its shape easier to picture.

Drink container	Approx. capacity	Approx. height	Approx. body diameter
Regular 12 oz soda can	355 mL	4.8 in / 12.2 cm	2.6 in / 6.6 cm
Standard 16 oz Monster can	473 mL	6.2 in / 15.7 cm	2.6 in / 6.6 cm
International 500 mL Monster can	500 mL	6.6–6.7 in / 16.8–17 cm	Around 2.6 in / 6.6 cm

The soda-can measure is a broad benchmark, whilst the Monster measurements differ by product and market.

Notable distinction is in height and capability. The body of a 12 oz soda and a standard 16 oz Monster are similar in diameter as well, but the Monster can have an extra four fluid ounces. This explains why the Monster has a taller than much wider look.

Will a Monster Can Fit in a Car Cup Holder?

While many car cup holders can accommodate a standard 16 oz can, it varies by make and model of car; as well as the design of the holder. The 2.6-inch body diameter of the can itself is only part of the answer. It should also have adequate depth and some space around the top so you can easily take out the can.

Check the two dimensions before fitting a bigger can for holders. A tall can may be up higher than you might expect, and a can that is too wide may not sit properly.

A simple fitting check:

1. Find the internal diameter of the cup holder.
2. Match it to the widest part of your can.
3. Test the depth of the holder and whether the can stays stable.
4. Instead of going for a close tight fit, leave a little extra gap-filled space.

DO NOT attempt to use any can just because it fits while driving. Ensure it stays comfortably and does not pull your attention away.

How to Measure Your Monster Can at Home

You just need a ruler or measuring tape to get a useful measurement for this.

For Height: Place the can upright on a flat surface. Start measuring from the middle of this distance to the top of the rim.

Measurement across the diameter: Measure from side to side of the widest part of the body of the can. Do not have it measured around the curve itself; that would give you the circumference rather.

When imperial units are metric: Inches to centimeters: 1 inch = 2.54 centimeters. For instance: 6.2 inches = ~15.7 cm

When converting centimeters to millimeters: 1 centimeter = 10 millimeters. So, 6.6 cm equals 66 mm.

The best way to do this is to measure your own can, particularly if you are building a custom shelf, purchasing a tight-fitting sleeve or checking the dimensions of a specific product variant.

Conclusion

So knowing monster can size will help you select the proper storage area, cup holder, cooler slot, or can sleeve. The typical 16 oz (473 mL) standard US can measure about 6.2 inches tall and 2.6 inches wide, but both smaller and larger versions exist as well as international variants with different proportions.

Take the measurements in this guide with a grain of salt, not as an assurance that each can be exactly alike. It does matter so measure the actual size of your can before buying a holder or space for it if a millimeter is important to you.

Frequently Asked Questions